Easy Installation

Step 1

Using the screws provided, attach 2 Beehive Picture Hangers® to the top corners of your frame. Your order includes 2 screws per hanger.

Step 2

Hold your frame up to the wall in the position you want to hang it, and press against the top corners of the frame. Apply enough pressure so the Positioning Points (the small points on the front of the hangers) mark your drywall.

Step 3

Insert the Support Pins into the wall where you’ve made your marks by tapping gently with a hammer. Be sure to hold the Support Pins so the rectangular plate is parallel to the wall while inserting at a downward angle.

Step 4

Hang your frame on the Support Pins. If adjustment is required, simply lift the frame from the Support Pin(s) and reinsert into another hole in the hanger.

Step 1

Using the screws provided, attach 2 Beehive Picture Hangers® to the top corners of your frame. Your order includes 4 screws per hanger.

TIP: Attaching the Max hangers across the miter joints will help prevent joint separation on heavy frames (see Tip on left).

Step 2

Hold your frame up to the wall in the position you want to hang it, and press against the top corners of the frame. Apply enough pressure so the Positioning Points (the small points on the front of the hangers) mark your drywall.

Step 3

Insert the Support Pins into the wall where you’ve made your marks by tapping gently with a hammer. Be sure to hold the Support Pins so the rectangular plate is parallel to the wall while inserting at a downward angle.

Step 4

Hang your frame on the Support Pins. If adjustment is required, simply lift the frame from the Support Pin(s) and reinsert into another hole in the hanger.